Eurocompulsion Euro+Drive Tuning System (Fiat/Abarth 500)

Regular price $799.99
/
Shipping calculated at checkout.

Vehicle Trim
Transmission
Year

The Eurocompulsion Euro+Drive Tuning Software allows you to unleash your Fiat or Abarth 500's full power potential! Available for the Fiat 500 Abarth and Fiat 500T. This ECU upgrade is available in multiple power & mod specific variations, from completely stock to heavily modified. Conveniently flashes the vehicles factory ECU through the OBD-II port without any physical modification to the ECU. Quick, easy, and safe! You'll notice an instant power increase, better throttle response, and smooth power delivery. Tested in house by Driven District on our Fiat 124 Spider Abarth, watch our acceleration performance results here: https://youtu.be/fKgrWGDDPfM

The purchase of a Euro+Drive Tuning System includes a map request of each Phase tune offered. This means as you progress from Phase 1 to Phase 2, you will not pay extra for the Phase 2 tune. You just need to meet the tune requirements.  Click Here For Tune Requirements

EURO+DRIVE® MAP OUTPUTS (INCLUDED FILES):

  • ~132.0 WHP  STOCK
  • ~153.8 WHP  695 F.T.
  • ~177.9 WHP  PHASE 0
  • ~188.6 WHP  PHASE 1
  • ~208.6 WHP  PHASE 2
  • ~224.5 WHP  PHASE 3 (EC 1446+ TURBO UPGRADE)

    EURO+DRIVE® TUNING FEATURES (INCLUDED):

    • RAISED REV LIMITER
    • RAISED SPEED LIMITER
    • CATTED DOWNPIPE / CATLESS DOWNPIPE OPTIMIZATION
    • PARK/NEUTRAL REV LIMITER REMOVAL (AUTO TRANS)
    • LAUNCH CONTROL (MANUAL TRANS ONLY)
    • POPS & BANGS (EXHAUST NOISE) (VIDEO FROM ARTBOX. EXHAUST SOUND AND POPS WILL VARY DEPENDING ON YOUR SPECIFIC SETUP.)
    • BURBLES (EXHAUST NOISE) (VIDEO FROM DRIVEN DISTRICTEXHAUST SOUND AND BURBLES WILL VARY DEPENDING ON YOUR SPECIFIC SETUP.
    • DUAL MAP MODE

    EURO+DRIVE® CUSTOM TUNING FEATURES (ADDITIONAL CHARGES MAY APPLY):

    • BIGGER TURBO
    • E85 OPTIMIZATION
    • ALTERNATIVE/HIGHER OCTANE FUEL OPTIMIZATION
    • WATER/METHANOL OPTIMIZATION

    EURO+DRIVE® FEATURES:

    • True OBD2 Flash Tuning/Calibrations
    • Use of Genuine OEM Software, Maps, and Protocols
    • Simple User Interface (with online instructions)
    • Storage of 5 maps for convenient map switching (including your stock map)
    • Each Calibration is custom calibrated to your ECU specific file and VIN number
    • Calibrations will include modification calibrations
    • Calibrations will Optimize power, drive-ability, and efficiency 
    • Unparalleled consistent, linear, & smooth power delivery
    • Calibrations will retain OEM tuning logic ( IE self-adaptation) and all safety checks
    • Flashing procedure is easy, safe, and protects against incomplete/incompatible flashes
    • Flashing procedure is easy & safe
    • All factory hardware works properly (including the factory Abarth boost gauge)
    • The EURO+DRIVE does not hack/manipulate or bypass the factory ECU
    • Full control over all engine parameters by utilizing true factory Calibrations
    • Specially requested Calibrations available (additional fees may apply)
    • 91 oct minimal fuel requirement
    • Calibrations are fine-tuned and custom-tailored for your existing modifications
    • EURO+DRIVE Calibrations are Street/AutoX/Track Proven
    • No physical removal of ECU is required
    • Calibrations delivered in 48-72 Business Hours
    • Please see our Tuning Requirements per Phase

    2012-2013 Fiat 500 Tune Installation Guide
    2014+ Fiat 500 Tune Installation Guide

    PERFORMANCE TEST ON A FIAT 124 SPIDER ABARTH 


    Recently viewed